Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Spark Plugs on the Alfa Romeo Mito 1.4 T

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Spark plugs

In today's tutorial video, see how to remove and replace the engine spark plugs on the Alfa Romeo Mito 1.4 turbo petrol, in simple and quick steps. First, open the bonnet of your car and start by removing the engine protection cover; then disconnect the four electrical connectors of the spark plugs by pressing on the safety tabs, as illustrated in the video. Remove the pipe found above the rail and move it away; unscrew the fixing screws of the coils to take them off. At this point, you can unscrew and replace the spark plugs using a socket wrench with an extension!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spark Plugs from a 1.4 Turbo Engine of an Alfa Romeo Mito
How to Remove the Spark Plugs from a 1.4 Turbo Engine of an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Before you can start, open the bonnet of your Alfa Romeo Mito. Begin by removing the upper engine cover. This will give you access to the spark plug …
How to Replace the Glow Plugs in an Alfa Mito 1.6 JTDM 120 HP.
How to Replace the Glow Plugs in an Alfa Mito 1.6 JTDM 120 HP.
Alfa Romeo Mito (2008-2018 / MK 1) In this tutorial, you will learn how to replace the glow plugs in an Alfa Mito 1.6 JTDM 120 HP by following a few simple steps: Lift the bonnet and s…
Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos