Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : Disassembly of the front axle shaft on the Alfa Romeo 156

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Drive shaft
Operation: Disassembly of the front axle shaft on the Alfa Romeo 156

Let's see in this video the steps that will allow us to remove the front axle shaft on the Alfa Romeo 156. First we lift the car and we go to remove the front wheel; after which we unscrew the central fixing nut of the front hub, in order to remove it, as shown in the video. At this point we are going to unscrew the fixing bolts that we find on the base of the front axle shaft, using a hex wrench; once the front arm has been disconnected, we can remove the front axle shaft; then let's reassemble everything, following the video tutorial until the end!


Posted on 29 February 2024 by ScegliAuto



How to replace the coolant reservoir on an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) This procedure is only to be carried out with the engine off. Let's start by opening the front hood of our Alfa Romeo 156. After that, we will have t
Disassembly of the front bumper of an Alfa 156
Alfa Romeo 156 (1997-2007 / MK 1) Is the bumper of the Alfa Romeo 156 damaged and cannot be repaired? Let's see how the car is removed from above. We open the front hood; we remove th
How to remove the front seat on Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) Let's see how to remove the front seat on Alfa Romeo 156. This video explains how to proceed: first of all we move the seat forward (with the electri

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos