Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Door Panel and Handle on Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Door trim panel

Video tutorial

Detach the upper part of the handle using a plastic lever (not metal!). Unscrew the two 8mm screws you have now uncovered. Unscrew the other three screws that secure the door panel: one is located at the bottom of the panel, another on the side (with a screw cover), and the last one where the opening handle is (with a screw cover), then detach the handle itself and the connector.

Using a plastic wedge, remove the protective plastic of the speaker and unscrew it. Also, remove the triangular plastic piece near the window. Now you can finally remove the door panel.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Replace the Internal Handle on an Alfa Romeo Giulietta?
How to Replace the Internal Handle on an Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the internal handle on an Alfa Romeo Giulietta, remove the cap located in the handle's housing and loosen the bolt beneath the cap. Next, …
How to Replace the Internal Handle of the Alfa Romeo Giulietta?
How to Replace the Internal Handle of the Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the internal handle of the Alfa Romeo Giulietta, remove the cap located in the handle's housing and loosen the bolt underneath the cap. Ne…
How to replace the inner handle of the front door of the Alfa Romeo Giulietta
How to replace the inner handle of the front door of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the internal handle of the front door of the Alfa Romeo Giuliet…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos