Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : How to replace the Alfa Romeo 147 climate control light bulbs

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Dashboard light
Operation: How to replace the Alfa Romeo 147 climate control light bulbs

We see in this guide the instructions that will allow us to remove and replace the air conditioning control bulbs of the Alfa Romeo 147, but also of the GT. First we get on board the car and start by removing the central plastics of the instrumentation; after which we unscrew the screws that we find below, disconnecting the electrical connectors that we find on the back of the climate control controls to remove them, as shown in the video. At this point we remove the small bulb bulbs and replace them with new ones, of the right type; then let's reassemble everything!


Posted on 14 April 2024 by ScegliAuto



Change the light bulbs of the air conditioning knobs on the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Let's find out the main instructions on how to remove and replace the air conditioning control bulbs on the Alfa Romeo 147, but also on the GT. First
How to change the headlight bulbs of the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) In today's video tutorial we will see how to remove and replace the headlight bulbs of the Alfa Romeo 147, but also on the 149 and 156, following the
How to replace the rear light bulb on Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Today we will see, in this video tutorial, how to remove and replace the rear light bulbs, and in particular the stop light, of the Alfa Romeo 147. F

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos