Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : How to disassemble the on-board computer in the Alfa Romeo 159?

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: -board computer
Operation: How to disassemble the on-board computer in the Alfa Romeo 159?

In this short tutorial we can see how to disassemble the on-board computer in the Alfa Romeo 159, a very simple and fast operation. To do this we will need two long metal rods, such as the special keys, screwdrivers, Allen keys etc. Once you have obtained these tools, make sure that the ignition is off and insert them into the two holes in the upper corners of the display. Once the release of the internal clips is perceived, we push the keys inwards and at the same time pull towards us, until the entire module is extracted from its seat. Finally, we disconnect each connector and mount any spare part.


Posted on 27 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 159 2005-2011 - What does the message "have engine oil changed" mean in Alfa Romeo 159? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos