Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Air Filter in the Alfa Romeo Stelvio

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Cabin air filter

Video tutorial

In this guide, you will learn how to replace the cabin air filter in your Alfa Romeo Stelvio. Unfortunately, its location is not very easy to reach, but with the following instructions, you will be able to complete the procedure without much difficulty.

First, go to the passenger side. Remove the lower panel of the glove compartment and unscrew all the screws located just below.

Also, remove the other plastic panel and then open the compartment. Again, you need to unscrew all the screws and completely disassemble the glove compartment.

At this point, locate the box containing the air filter and proceed with the replacement. Finally, reassemble everything correctly, and you are done.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) To replace the engine air filter in the Alfa Romeo Stelvio, open the hood and locate the air filter box, usually positioned at the top of the engine …
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) Let's see how to replace the cabin air filter on the Alfa Romeo Stelvio. Position yourself in the front passenger seat, remove the floor mat, unclip …
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this video, you will see the procedure for replacing the engine oil and oil filter while performing the regular maintenance service on the Alfa Ro…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos