Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on the Alfa Romeo Stelvio

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Cabin air filter

Video tutorial

Let's see how to replace the cabin air filter on the Alfa Romeo Stelvio. Position yourself in the front passenger seat, remove the floor mat, unclip the final section of the center tunnel cover, and with a Torx 25 wrench, unscrew the three screws that secure the lower panel of the glove compartment to remove it. Move the polystyrene air duct after unclipping the push pins that hold it, shift the rubber tube covering the filter cover to open it, and remove the old filter element.

Take the new filter, spray the surfaces with disinfectant spray, and using a long flathead screwdriver, insert it into its seat and close the cover. Now you can reassemble everything by reversing the previous steps.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in an Alfa Romeo Stelvio
How to Replace the Key Battery in an Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) Start by prying off and removing the back of the key fob for your Alfa Romeo Stelvio to extract the physical emergency key. Next, using the extracted…
How to Replace the Cabin Air Filter in the Alfa Romeo Stelvio
How to Replace the Cabin Air Filter in the Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this guide, you will learn how to replace the cabin air filter in your Alfa Romeo Stelvio. Unfortunately, its location is not very easy to reach, …
Where to Find the OBD Port in the 2018 Alfa Romeo Stelvio
Where to Find the OBD Port in the 2018 Alfa Romeo Stelvio
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) To access the OBD port in your 2018 Alfa Romeo Stelvio, follow the steps outlined in this guide. First, open the driver's side door and enter the veh…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos