Do it yourself
| ||||
|
Alfa Romeo 147 - Video tutorial
Model: Alfa Romeo 147
MK 1
- Years 2000-2010 In order to install the USB socket in the Alfa Romeo 147 it is first of all necessary to remove the cigarette lighter. To do this, you will need to lift the leather gearshift gaiter to be able to disconnect the cigarette lighter connector and remove it from its housing, pushing from the inside outwards. Once the cigarette lighter has been removed, the piece with two USB sockets must be inserted in its housing, which must then be connected to the connector from the inside. Once the part has been connected and inserted, it will be possible to lower the gear lever boot again.
Posted on 3 May 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |