Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on an Alfa Romeo 159?

Model: Alfa Romeo 159 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Diesel fuel filter

Video tutorial

In this tutorial, you will see how to replace the fuel filter on an Alfa Romeo 159, a very simple task. First, ensure the engine is completely cold, then open the bonnet and remove the plastic cover.

Next, disconnect the connector located at the bottom of the filter, undo the bolt of the retaining clamp, and disconnect the two upper pipes, taking care to avoid any spills. Once extracted, remove the entire plastic insert and fit the new one, which should be installed by following the exact reverse procedure.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Filter on Alfa Romeo 159 - Brera JTDM
Replacing the Fuel Filter on Alfa Romeo 159 - Brera JTDM
Alfa Romeo 159 (2005-2011 / MK 1) Today, in this video tutorial, you will learn how to remove and replace the fuel filter on an Alfa Romeo 159, as well as on the Brera, with a JTDM Di…
How to Remove the Fuel Filter on an Alfa Romeo 159
How to Remove the Fuel Filter on an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Follow these steps to remove the fuel filter on an Alfa Romeo 159: lift the car on a column lift or a suitable jack (if necessary), locate the fuel f…
How to replace the fuel pump in the Alfa Romeo 159 2.0 JTDm
How to replace the fuel pump in the Alfa Romeo 159 2.0 JTDm
Alfa Romeo 159 (2005-2011 / MK 1) This guide briefly outlines the instructions for removing and replacing the fuel pump in the Alfa Romeo 159 2.0 JTDm. First, open the rear doors of t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos