Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Driveshaft Oil Seal on an Alfa Romeo 147?

Model: Alfa Romeo 147 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

Video tutorial

To replace the driveshaft oil seal on an Alfa Romeo 147, loosen the bolts securing the corresponding wheel so it can be removed. Then, loosen the screws that attach the wheel disc to the driveshaft, allowing the two parts to be separated and providing access to the driveshaft.

Here, loosen the screws securing the oil seal and remove it, replacing it with a new part. After removing the old oil seal, reinstall all other previously removed parts.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper from an Alfa Romeo 147
How to Remove the Front Bumper from an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, open the bonnet of your Alfa Romeo 147. Begin by unscrewing and removing all screws and bolts that secure the front bumper to the ch…
Where to Find the Fuse Box in an Alfa Romeo 147
Where to Find the Fuse Box in an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) If you cannot find the location of the fuse box in your Alfa Romeo 147, simply follow this mini guide. First, enter the car (driver's side) and reach…
How to replace the reverse button of the Alfa Romeo 147 gear lever
How to replace the reverse button of the Alfa Romeo 147 gear lever
Alfa Romeo 147 (2000-2010 / MK 1) Today we will replace the propulsion button located under the gear knob of the Alfa Romeo 147; the use of the button is necessary to engage reverse g…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos