|
Do it yourself
| |||
| ||||
How to Prevent the Side Mirror of an Alfa Romeo 156 from Detaching When Closed
Model: Alfa Romeo 156
MK 1
- Years:
1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
The side mirrors of the Alfa Romeo 156 are prone to detaching when closed. Modify the joint to avoid this unpleasant issue. First, remove the three screws that secure the base of the mirror. Gently lever with a spatula to remove the actual mirror; it is not necessary to disconnect the electrical connectors, just remove it from its housing. Now work on the joint by removing the screws, first the outer one, then the one inside the mirror. You will have separated the mechanism from the cover. Still on the joint, use a ratchet spanner to remove the central bolt: you will have completely disassembled the mechanism. When reassembling, place the socket under the spring, above the washer and the screw, under a large washer (which was not there before) and a bolt. Tighten the pieces. Reinsert the mechanism into the cover: first the cable, then pass the arm through, replace the two screws, and reattach the mirror. You can now reassemble the base of the mirror and put everything back in place on the vehicle. Job done.
Updated on 27 June 2026 by ScegliAuto
Related tutorials
Alfa Romeo 156
(1997-2007 /
MK 1)
If you own an Alfa Romeo 156 and want to learn how to replace the button battery inside the key, simply read the following guide carefully. First, yo…
Alfa Romeo 156
(1997-2007 /
MK 1)
This procedure must be carried out with the engine off. Start by opening the front bonnet of your Alfa Romeo 156. Next, position a container undernea…
Alfa Romeo 156
(1997-2007 /
MK 1)
Before you start, open the rear doors of your Alfa Romeo 156. First, loosen and remove the lower bolts securing the rear seat bench, then unclip and …
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |