Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seat of the Alfa Romeo Brera?

Model: Alfa Romeo Brera MK 1 - Years 2005-2010
Part: Seat

The rear seat of the Alfa Romeo Brera is connected to the chassis via two hooks. There are no bolts, screws, or other mechanisms holding it in place. The video shows the exact position of the two attachment points and how to disconnect them. As explained in the audio, to release the rear seat of the Alfa Romeo Brera, simply pull it upwards: this will disengage the two hooks from the chassis and the seat will be free. You can take this opportunity to perform a deep clean, renew the upholstery, or completely replace it, depending on its condition.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight of the Alfa Romeo Brera
How to replace the rear headlight of the Alfa Romeo Brera
Alfa Romeo Brera (2005-2010 / MK 1) In this guide, we will see the steps that will allow us to disassemble and replace the rear taillight of the Alfa Romeo Brera. First, we open the rea…
How to remove the rear bumper of the Alfa Romeo Brera
How to remove the rear bumper of the Alfa Romeo Brera
Alfa Romeo Brera (2005-2010 / MK 1) The following steps will show us the process of disassembling and replacing the rear bumper of the Alfa Romeo Brera. First, let's move to the rear of…
How to Replace the Front Door Speakers on the Alfa Romeo Brera
How to Replace the Front Door Speakers on the Alfa Romeo Brera
Alfa Romeo Brera (2005-2010 / MK 1) In this guide, we will provide instructions to remove and replace the front door speakers on the Alfa Romeo Brera. First, open the front door of the …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos