Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the rear bumper of the Alfa Romeo Brera

Model: Alfa Romeo Brera MK 1 - Years 2005-2010
Part: Rear bumper

The following steps will show us the process of disassembling and replacing the rear bumper of the Alfa Romeo Brera. First, let's move to the rear of the car and start unscrewing all the fixing screws we find on both sides of the rear wheel arches; then open the rear tailgate of the trunk and remove the rear lights, unscrewing the screws and disconnecting the electrical connector, as shown in the video. At this point, gently detach the rear bumper on the sides until it is completely removed, applying the reverse process for reassembly!

Posted on 3 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Alfa Romeo Brera (2005-2010 / MK 1) In this tutorial, you will learn how to remove the rear bumper on an Alfa Romeo Brera, a very simple and quick operation. First, open the boot and re…
Alfa Romeo Brera (2005-2010 / MK 1) The rear seat of the Alfa Romeo Brera is connected to the chassis via two hooks. There are no bolts, screws, or other mechanisms holding it in place.…
Alfa Romeo Brera (2005-2010 / MK 1) In this guide, we will see the steps that will allow us to disassemble and replace the rear taillight of the Alfa Romeo Brera. First, we open the rea…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos