Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Light of the Alfa Romeo Brera

Model: Alfa Romeo Brera MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light

Video tutorial

This guide outlines the steps to remove and replace the rear light of the Alfa Romeo Brera. First, open the boot and start by removing the side internal cover; then, unscrew the three screws of the light using a socket spanner with an extension, as shown in the video.

At this point, remove and replace the rear light bulbs if necessary by disconnecting the electrical connector; if needed, replace the entire light unit, reconnecting and securing the light back onto the bodywork.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

Alfa Romeo Brera (2005-2010 / MK 1) The rear seat of the Alfa Romeo Brera is connected to the chassis via two hooks. There are no bolts, screws, or other mechanisms holding it in place.…
Alfa Romeo Brera (2005-2010 / MK 1) The following steps will show you the procedure for removing and replacing the rear bumper on an Alfa Romeo Brera. First, move to the rear of the veh…
Alfa Romeo Brera (2005-2010 / MK 1) To replace the fog light of the Alfa Romeo Brera, use a tool to lever off the plastic cover surrounding the light. Once the cover is removed, loosen …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos