Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : How to replace the air filter on Alfa Romeo 156.

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Air filter
Operation: How to replace the air filter on Alfa Romeo 156.

In this video tutorial, we can see how it is possible to replace the air filter on an Alfa Romeo 156 by following a few simple steps: the first thing to do is to purchase a new air filter from an authorized dealer; the next step is to lift the engine hood and secure it with a special rod, remove the air tube by loosening the clamps (use a flathead screwdriver to leverage), pull and remove the tube. Disconnect the air sensor (release the clip). Unscrew the fastening elements of the filter cover; remove the filter cap and remove the old filter element from its housing; position the new filter element and reassemble all the parts in reverse order.


Posted on 29 June 2023 by ScegliAuto

    Frequently Asked Questions

    • 156 1997-2007 - Where is the air filter in the Alfa Romeo 156 passenger compartment? Read Answer
    • 156 1997-2007 - How much does it cost to replace the air filter on an Alfa Romeo 156 1.8 TS? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos