Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Maintenance Service on the Audi A1 1.4 TFSI

Model: Audi A1 8X, MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine oil

See other generations:
Video tutorial

To keep the engine in good condition, it is essential to carry out regular maintenance; here’s how to replace the engine oil and oil filter on the Audi A1 1.4 TFSI. First, raise the vehicle and unscrew the oil drain bolt located on the sump, allowing the oil to drain into a container for about ten minutes; now use the appropriate spanner to unscrew and remove the oil filter cartridge, as shown in the video.

At this point, hand-tighten the oil filter and gently secure it, then top up with the new oil (pouring the correct amount).


Updated on 31 October 2026 by ScegliAuto


Related tutorials

How to Start the Engine of an Audi A1 1.4 TFSI
How to Start the Engine of an Audi A1 1.4 TFSI
Audi A1 (2010-2018 / 8X, MK 1) Follow these brief and simple instructions to start the engine of an Audi A1 1.4 TFSI with a manual gearbox. First, get into the vehicle and insert t…
How to Reset the Service Light on the Audi A1
How to Reset the Service Light on the Audi A1
Audi A1 (2018-2025 / MK 2, GB) This guide provides the necessary instructions to reset the service light for the routine oil change maintenance on the Audi A1. First, get inside th…
How to reset the service light on the Audi A1.
How to reset the service light on the Audi A1.
Audi A1 (2018-2025 / MK 2, GB) The service light reset must be performed every time we carry out maintenance work on the vehicle. To reset it on the Audi A1, we need to turn on the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos