Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box located and how to reach it in an Audi A4?

Model: Audi A4 B6 - Years 2000-2004
Part: Fuse box

The fuse box of an Audi A4 is located in the engine compartment, positioned near the driver's side, next to the battery. To access it, open the hood using the internal lever located under the dashboard. Once the hood is open, locate the cover of the fuse box, easily recognizable by its rectangular shape and fuse symbol. Carefully remove the cover, usually held in place by clips or snap hooks. Inside you will find the fuses arranged neatly, with a reference diagram printed on the inside of the cover to identify each circuit.

Posted on 7 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Access the Fuse Box of an Audi A4
How to Access the Fuse Box of an Audi A4
Audi A4 (2004-2008 / B7) Before you can start, open the driver's side front door of your Audi A4. Begin by inserting the tip of a flathead screwdriver into the gap between th…
Where is the fuse box located in the Audi A4?
Where is the fuse box located in the Audi A4?
Audi A4 (2014-2024 / B9) The Audi A4 vehicles produced from 2015 to 2019 have three fuse boxes. The first fuse box is installed in the trunk, specifically behind the left das…
Where is the fuse box of the Audi A4 located?
Where is the fuse box of the Audi A4 located?
Audi A4 (2007-2016 / B8) Knowing the exact location of the fuse box of the Audi A4 is a very important operation, as it will allow you to replace one of the fuses contained i…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos