Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the turn signal bulb of the Audi A3 side mirror

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side marker bulb

See other generations:
Video tutorial

Today we will see the instructions that will allow us to disassemble and replace the turn signal bulb of the external rearview mirror of the Audi A3. First of all, let's move to the side and start by removing the mirror glass, levering on the sides and disconnecting the connector on the back; then we remove the plastic cover of the mirror to access the turn signal light, as shown in the video.

At this point, we remove the turn signal light and replace it with the new one, of the right type; let's check its operation and reassemble the mirror!


Posted on 11 December 2024 by ScegliAuto


Related tutorials

How to replace the external rearview mirror of the Audi A3
How to replace the external rearview mirror of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) In these short and simple steps, we will see the process of disassembling and replacing the external rearview mirror of the Audi A3. First, open the …
How to Replace the Bulb in an Audi A3 Wing Mirror
How to Replace the Bulb in an Audi A3 Wing Mirror
Audi A3 (2012-2019 / 8V, MK 3) Let’s see how to replace the bulb located in the external rear-view mirror of an Audi A3. Using a screwdriver or a plastic lever, remove the number p…
Replacing the External Wing Mirror of an Audi A3
Replacing the External Wing Mirror of an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How do you replace the external wing mirror (passenger side) of an Audi A3? Follow these steps. Using a plastic or rubber lever, pry between the peri…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos