Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to turn off the service light on the Audi A3 8L

Model: Audi A3 MK 1, 8L - Years 1996-2003
Part: Service warning light

In this video we see how to turn off the service light of the Audi A3 version 8L: first of all, check that all doors, hood, and rear trunk are closed. Then make sure to have the key in the OFF position, and pull the left lever (the one on the clock side) keeping it pulled throughout the operation. Now turn the key to the ON position, but without starting the engine. Continue to keep the left lever pulled. When the word "service" appears on the display, pull and release the right lever, which is the one for resetting the partial kilometers. At this point, additional information about the service will appear: pull the right lever again and after a few seconds the display will show "__". At this point, the service has been reset correctly.

Posted on 13 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on an Audi A3?
How to Reset the Service Light on an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) The procedure to reset the Service light on an Audi A3 involves turning on the ignition by rotating the key in the ignition switch, then locating the…
How to reset the service light in the Audi A3
How to reset the service light in the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) In today's video, see how to reset the service due parameter in the third series Audi A3. First, remember to perform the correct maintenance as state…
How to Reset the Service Light on Audi A3
How to Reset the Service Light on Audi A3
Audi A3 (2003-2013 / MK 2, 8P) From the instrument cluster of the Audi A3, you can completely clear the Service light by activating the instrument cluster, turning the appropriate …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos