Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Mirror Adjustment Button

Model: Audi A6 C5, MK 2 - Years 1997-2004
Part: Push button

The mirror adjustment button is located on the center console, just behind the gear shift lever.
To release it, first lift the cover located just behind the button: once the cover is open, you can insert a finger, press the plastic tab, and then pull out the button. At this point, disconnect the connector by simultaneously pressing the two side locks. Connect the new button's connector, position it in its slot ensuring the mirror symbols are facing forward, and snap it in by pressing down.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external rearview mirror of the Audi A6
How to replace the external rearview mirror of the Audi A6
Audi A6 (2018-2026 / MK 5, C8) Today we will see the step-by-step instructions that will allow us to disassemble and replace the external rearview mirror of the Audi A6. First, we …
How to disassemble the external rearview mirror in the Audi A5?
How to disassemble the external rearview mirror in the Audi A5?
Audi A6 (1997-2004 / C5, MK 2) In this tutorial, we can see how to disassemble the external rearview mirror in the Audi A6, an extremely simple and fast operation. First, we open t…
Replacing the Side Mirror Glass
Replacing the Side Mirror Glass
Audi A6 (2004-2012 / C6, MK 3) Replacing the side mirror glass is very simple since it is attached to the support only through plastic tabs. It is also easy to find a replacement i…

How to Replace the Engine Air Filter on a Volkswagen Polo

Remove the engine air filter from a Volkswagen Polo: open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it with the prop rod. Remove the engine soundproofing panel (if necessary), then open the air box (unscrew the securing screws), remove the cover of the filter box and take out the engine air filter. Insert a new filter into the dedicated housing (ensuring it fits snugly around the edges). Finally, refit the air box cover and tighten the screws. Close the front bonnet after maintenance.

Watch the video!


by ScegliAuto

More videos