Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the AdBlue warning light on the Audi Q5?

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: AdBlue warning light

On the instrument panel of the Audi Q5, when the AdBlue warning light comes on, it means there may be various problems related to this system: if you have already topped up, the most common issue concerns a defect in the related control unit that regulates its operation. This can be accessed by lifting the car and removing the protective panel on the underside of the vehicle, near the left rear wheel: then you will need to connect a multimeter to the control unit to check for malfunctions. To top up, you will need to open the fuel door and remove the smaller cap located at the bottom right.

Posted on 10 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the AdBlue top-up warning on the Audi Q5 2.0 TDI
How to reset the AdBlue top-up warning on the Audi Q5 2.0 TDI
Audi Q5 (2008-2017 / MK 1, 8R) Today we will discover the procedure to reset the warning light for topping up the AdBlue fluid in the Audi Q5 2.0 TDI. Before resetting the AdBlue t…
Reset the AdBlue warning of the Audi Q5
Reset the AdBlue warning of the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) In this guide, we will see the main information useful for resetting the warning light of the AdBlue liquid top-up in the Audi Q5. In order to reset …
How do you reset the AdBlue warning light on the Audi Q5?
How do you reset the AdBlue warning light on the Audi Q5?
Audi Q5 (2017-2025 / MK 2, 80A) In order to reset the AdBlue warning light that appears on the instrument panel of the Audi Q5, you must go and refill with the necessary amount of a…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos