Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A4
    4. : How to disassemble the air conditioning compressor on

Audi A4 - Video tutorial

Model: Audi A4 B7 - Years 2004-2008
Part: Air conditioning
Operation: How to disassemble the air conditioning compressor on

How to disassemble the air conditioning compressor on Audi A4? We open the bonnet and put it in safety, then, we detach the plastic rivets and we remove the air intake, with a suitable socket wrench we go to disassemble the plates that block the radiator in the upper part, then we lift the car on a column bridge (if necessary). We disassemble the coil placed horizontally from the radiator with the help of pliers, immediately afterwards with a wrench we unscrew the large sleeve from the top of the car. Once free from screws and pipes we can work on the disassembly of the air compressor in the engine compartment. Having reached this point, unscrew the pins on the base in the engine compartment, releasing the air compressor, then unscrew it with the attached belt. Let's get ready to mount the piece in the engine compartment, connect the straps, clamps and tighten well with a socket wrench.


Posted on 25 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • A4 2007-2016 - Where is the air conditioning relay located in the Audi A4? Read Answer
    • A4 2000-2004 - What problems afflict the air conditioning of the Audi A4 b6? Read Answer
    • A4 2004-2008 - Why doesn't the heating work in the Audi A4? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos