Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the light in the luggage compartment of an Audi A3 8P

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Interior dome light bulb

See other generations:
Video tutorial

In this video, we will see how to change the bulb inside the trunk of an Audi A3 8P, with a white LED T10 canbus. The fact that it is canbus will prevent error warnings on the dashboard.

Using a flat head screwdriver, or a plastic spatula - to avoid any scratches - we remove the light fixture from its housing. Disconnect the electrical connector, and separate the transparent part of the light fixture from the other half.

Remove the old bulb and replace it with the new LED bulb, then put the two halves of the light fixture back together, reconnect it to the electrical connector. We will immediately appreciate the white light - and put everything back in place.


Posted on 11 May 2025 by ScegliAuto


Related tutorials

Removing the Rear Stop Light on Audi A3
Removing the Rear Stop Light on Audi A3
Audi A3 (1996-2003 / MK 1, 8L) This guide covers the removal of the rear light on an Audi A3. Remove the various covers to access the rear light. Lift the boot, open the plastic in…
How to Remove the Rear Light on an Audi A3 S3 and RS3
How to Remove the Rear Light on an Audi A3 S3 and RS3
Audi A3 (2012-2019 / 8V, MK 3) This guide shows how to remove the rear light on an Audi A3, both in S3 and RS3 versions. The first operation is to open the boot and remove the trim…
How to Remove the Rear Light Cluster from an Audi A3
How to Remove the Rear Light Cluster from an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) To replace the rear light cluster on an Audi A3, first open the tailgate of the boot. Once done, locate a slot on the side of the light to be removed…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos