Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the diesel fuel filter?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Diesel fuel filter

We need to clarify that the entire operational sequence visible in the video tutorial attached below is not specific to the Audi A3 but is of a generic value, as in all cars the method is almost the same. The work is carried out in the engine compartment and therefore we open the latter and locate the filter, then we place rags around it to prevent accidental spills of diesel from staining the adjacent parts during disassembly, we open the container and extract the filter in question and the gasket from inside. Now, after lightly lubricating them with the same diesel, we install the new filter and gasket.

Posted on 18 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace the Fuel Filter on Audi A3 2.0
Replace the Fuel Filter on Audi A3 2.0
Audi A3 (2012-2019 / 8V, MK 3) Want to replace the diesel filter on your Audi A3? Let's go through the disassembly of all the parts to remove the diesel filter. Lift the front bonn…
How to replace the fuel filter on the Audi A3?
How to replace the fuel filter on the Audi A3?
Audi A3 (1996-2003 / MK 1, 8L) This video shows how to change the fuel filter on the first model of Audi A3. Follow the steps of the YouTuber and start by opening the fuel flap and…
How to Dismantle the Diesel Filter on an Audi A3
How to Dismantle the Diesel Filter on an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Learn how to dismantle the diesel filter on an Audi A3: lift the bonnet (engine) and secure it, then locate the diesel filter. Using a screwdriver (T…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos