Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Audi A1 remote control

Model: Audi A1 8X, MK 1 - Years 2010-2018
Part: Key

The battery of the Audi A1 remote control can be replaced independently thanks to our short video tutorial that will show us the steps to follow. The battery we will use for the replacement is a CR 2032 3 Volt battery from Panasonic. We lift the metal key and insert a flat-tip screwdriver or any flat tool into the side space to apply slight pressure upwards to remove the remote control cover. Once the cover is removed, we replace the battery. After closing the cover, we press the unlock buttons to check that the remote control works perfectly.

Posted on 20 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Audi A1 key
How to replace the battery of the Audi A1 key
Audi A1 (2010-2018 / 8X, MK 1) To replace the battery of the Audi A1 key, we need to insert a plastic removal tool into the side part in order to open the remote control cover and …
How to Replace the Remote Battery of the Seat Ibiza?
How to Replace the Remote Battery of the Seat Ibiza?
Audi A1 (2010-2018 / 8X, MK 1) To replace the battery of the Audi A1 remote, press the designated button located on the top of the device to lift the key blade. Once the key blade …
How to Replace the Remote Key Battery in an Audi A1?
Audi A1 (2010-2018 / 8X, MK 1) To replace the remote key battery in an Audi A1, use a thin object as a lever, such as a screwdriver, to lift the cover on the back of the remote, un…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos