Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to disassemble the float on Audi A3

Audi A3 - Video tutorial

Model: Audi A3 MK 1, 8L - Years 1996-2003
Part: Fuel pump
Operation: How to disassemble the float on Audi A3

Let's see how to disassemble the floating fuel pump on Audi A3. We disconnect the battery cables, then, we remove the rear seats of the car; we will find the various wiring and a metal cover with screws, which we must disassemble. Unscrew the tightening screws of the metal cap with a socket wrench; Let's remove it from its seat, wrap the entire perimeter of the sheet with absorbent paper or cloth, then, with a socket wrench, unscrew the locking pins on the sides. Finally we disconnect the power supply terminals and the liquid circulation pipes, extract the floating fuel pump. To carry out the assembly we continue backwards.


Posted on 31 October 2023 by ScegliAuto

Other guides that may interest you

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos