Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Audi Q4 remote control?

Model: Audi Q4 MK 1 - Years 2021-2026
Part: Key

In this tutorial, we will see how to replace the battery of the Audi Q4 remote, a very simple and quick operation. To do this, we will need a small flathead screwdriver and a replacement battery of type CR2032. First, we extract the emergency metal key by pressing the designated button, then we insert the tip of the screwdriver into the indicated slot, leverage it, and unlock the rear cover. Next, we remove the old battery, insert the replacement while being careful to respect the polarity, and reassemble everything by following the reverse procedure.

Posted on 7 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on an Audi Q4
How to Replace the Key Battery on an Audi Q4
Audi Q4 (2021-2026 / MK 1) This brief video guide shows how to replace the key battery on an Audi Q4. The battery required for this remote is a CR2032 3V. First, extract the ph…
How do you replace the battery in the Audi A4 key?
How do you replace the battery in the Audi A4 key?
Audi Q4 (2021-2026 / MK 1) In the video guide provided here, we find images regarding the replacement of the battery for the key/remote control of Audi cars in general, so it c…
How to Replace the Pyrofuse in the Audi Q4
How to Replace the Pyrofuse in the Audi Q4
Audi Q4 (2021-2026 / MK 1) Today, we will explain how to replace the pyrofuse in the electric Audi Q4. Lift the vehicle on a ramp to access the underside and disconnect the bat…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos