Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Audi Q4

Model: Audi Q4 MK 1 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

Video tutorial

The battery of the Audi Q4 car is located inside the trunk, specifically under the spare wheel protected by a hard plastic cover. To replace the battery, we need to open the trunk and remove the spare wheel, then we can unscrew the screw that holds the cover to remove it. Disconnect the positive terminal and the negative terminal to remove the battery.

Insert the new battery and connect the terminals, close the battery cover and place the spare wheel back in the compartment. Close the trunk to test the battery operation.


Posted on 3 December 2024 by ScegliAuto


Related tutorials

How to replace the battery of the Audi Q4 remote control?
How to replace the battery of the Audi Q4 remote control?
Audi Q4 (2021-2026 / MK 1) .. In this tutorial, we will see how to replace the battery of the Audi Q4 remote, a very simple and quick operation. To do this, we will.. …
How to Replace the Key Battery on an Audi Q4
How to Replace the Key Battery on an Audi Q4
Audi Q4 (2021-2026 / MK 1) This brief video guide shows how to replace the key battery on an Audi Q4. The battery required for this remote is a CR2032 3V. First, extract the ph…
How to Replace the Pyrofuse in the Audi Q4
How to Replace the Pyrofuse in the Audi Q4
Audi Q4 (2021-2026 / MK 1) Today, we will explain how to replace the pyrofuse in the electric Audi Q4. Lift the vehicle on a ramp to access the underside and disconnect the bat…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos