Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the air filter on Audi A6

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Air filter

How to remove the air filter on Audi A6? We open the car door, pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same with the rod / piston. We remove the soundproofing panel of the engine and uncover the cap of the air box; we take out the worn air filter (We disconnect the aeration tube). We insert a new filter in the dedicated housing (making it adhere well around the walls). Finally we reassemble the cap of the air box and tighten everything. We close the front hood at the end of the maintenance.

Posted on 1 November 2019 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine air filter of the Audi A6 2013
How to replace the engine air filter of the Audi A6 2013
Audi A6 (2011-2018 / C7, MK 4) If you own an Audi A6 (2013) and need to replace the engine air filter by yourself, all you have to do is read the following guide and follow all the…
How to replace the Audi A6 air filter
How to replace the Audi A6 air filter
Audi A6 (2004-2012 / MK 3, C6) Replace the air filter on Audi A6? Let's see the replacement of the filter. We lift up the front hood, we secure the same with the rod. We remove the…
How to replace an air filter on Audi A6
How to replace an air filter on Audi A6
Audi A6 (2011-2018 / C7, MK 4) Let's see how to replace the engine air filter mounted on an Audi A6. We open the car door, pull up the engine compartment opening lever located at t…

Other guides you may be interested in

How to Change the Diesel Filter on a Renault Captur 1.5 dCi

The diesel filter on the Renault Captur is always of the immersion type, but instead of being located at the top of the engine bay, it is positioned lower, inside the front right wheel arch (passenger side), practically under the headlamp. To replace it, it is advisable to lift the vehicle, remove the front right wheel and the corresponding inner lining to access the filter location. Unscrew the fastening nuts of the support clamp to extract it from its housing and disconnect the connector and pipes. At this point, unscrew the fixing screws of the cap, remove the old filter and insert the new one, also replacing the O-ring seals, and then reverse the steps for installation. Before starting the engine, turn the ignition on and off several times to allow the filter to fill.

Watch the video!


by ScegliAuto

More videos