|
Do it yourself
| |||
| ||||
How to change the battery of the 2023 Audi A3 key.
In today's article, we will see how to replace the battery of the 2023 Audi A3 key. For this operation, you will need a small flathead screwdriver and a CR2032 battery. First, you need to remove the emergency key using the designated button and pulling the key outwards. After removing the key, insert the screwdriver into the hole of the key and lever it to lift the cover. Once the cover is lifted, use the screwdriver to pry it off completely. After removing it, use the screwdriver to lift and remove the battery. Now, replace it with a new one, reinsert the cover by pressing it back into place with your hands, and then reinsert the emergency key.
Posted on 29 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Audi A3
(1996-2003 /
MK 1, 8L)
Replacing the key of an Audi A3? Let's see how the battery inside the remote control key is removed. We take our ignition key and go to press the but…
Audi A3
(2012-2019 /
MK 3, 8V)
How do you change the battery of the Audi A3 remote control? Let's see how to change the key battery. We take our remote control and we go with the h…
Audi A3
(2020-2026 /
8Y, MK 4)
In today's article, we will show you how to replace the battery of the 2024 Audi A3 key. For this operation, you will need a small flathead screwdriv…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.151
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
