Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Audi E-Tron remote control.

Model: Audi E Tron MK 1 - Years 2018-2023
Part: Key

Replacing the battery of the Audi E-Tron remote control is a simple and quick task that can be done independently. To replace the battery, we need to use a flat-head screwdriver, which should be inserted at the bottom of the remote to remove the cover. After removing the cover with the screwdriver, we take out the old battery and insert the new one using the CR 2032 model. Once the battery is in place, we close the remote control's cover and test its functionality. If it does not work, it is necessary to reprogram the remote control.

Posted on 6 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Audi E-Tron?
How to Replace the Remote Battery of the Audi E-Tron?
Audi E Tron (2018-2023 / MK 1) To replace the battery in the Audi E-Tron remote, remove the key from the top of the device to pry it open. This will allow you to detach the panel o…
How to replace the battery of the Audi E-tron key
How to replace the battery of the Audi E-tron key
Audi E Tron (2018-2023 / MK 1) In this video, we see how to change the battery of the key for the Audi A3 E-tron. Press the metal button located on the side with the "e-tron" inscr…
How to Change the Remote Battery in an Audi Q7 E-tron
How to Change the Remote Battery in an Audi Q7 E-tron
Audi E Tron (2018-2023 / MK 1) To change the battery in the remote of an Audi Q7 E-tron, start by extracting the emergency key. Press the two side buttons and simultaneously pull o…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos