Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the headlights of the Audi Q5.

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Checks and maintenance

In this brief guide, we will see the instructions that will allow us to adjust the height of the front headlights of the Audi Q5 in simple steps. First, let's position the vehicle in front of a fixed reference point, preferably in low light; then we turn on the front headlights and open the hood, as shown in the video. At this point, we use a hex key to adjust the height of the headlight assembly by tightening or loosening the screw found above it; the important thing is to ensure that both front headlights are at the same height, finally adjusting the lights using the automatic adjustment feature inside the cabin.

Posted on 8 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Headlights on an Audi Q5?
How to Adjust the Headlights on an Audi Q5?
Audi Q5 (2008-2017 / MK 1, 8R) To adjust the headlights on an Audi Q5, first turn on the ignition and the headlights to check where the beam of light is directed: once the headligh…
How to Replace the Radiator Fan on an Audi Q5
How to Replace the Radiator Fan on an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Before you can start, open the hood of your Audi Q5. Begin by removing the bumper and the front headlights by unscrewing the mounting screws and rele…
How to disassemble the headrests of the Audi Q5
How to disassemble the headrests of the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Following the instructions in this guide, we will see how to disassemble and remove the front headrests, but it also applies to the rear headrests, o…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos