Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine Air Filter on an Audi A6

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Air filter

Let's see how to remove the engine air filter on an Audi A6: open the car door, pull up the hood release lever located at the lower left of the dashboard, and lift the front hood, securing it with the prop rod. Remove the engine soundproofing panel, then disassemble the air kit (loosen the securing screws), uncover the filter box cap, and extract the worn air filter. Insert a new filter into the designated housing (making sure it fits snugly around the walls). Finally, reattach the air box cap and tighten the screws. Close the front hood after maintenance.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Audi A6 2.7 TDI
How to replace the air filter of the Audi A6 2.7 TDI
Audi A6 (2004-2012 / MK 3, C6) Following these brief instructions, we will see how to disassemble and replace the engine air filter of the Audi A6 with a 2.7 TDI engine, in simple …
How to Remove Air Filter on Audi A6
How to Remove Air Filter on Audi A6
Audi A6 (2004-2012 / MK 3, C6) How to remove the air filter on an Audi A6? Open the car door, pull up the engine hood release lever located at the bottom left of the dashboard, and…
Replacing Engine Air Filter on Audi A6
Replacing Engine Air Filter on Audi A6
Audi A6 (1997-2004 / MK 2, C5) In this video tutorial, you will see how to remove the air filter from an Audi A6 in just a few steps. First, open the hood of the vehicle and remove…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos