|
Do it yourself
| |||
| ||||
|
Replacing the battery in an Audi A4 is a very simple operation, which does not require special knowledge, except to take the right battery and have the keys to disassemble and reassemble the battery itself. As the video explains, it is necessary to act on the boot, it must be opened and removed all the cover up to the compartment where the spare wheel (or the small wheel or the emergency inflation kit) is present, once the wheel lock has been removed. escort, you get to the battery. First the battery retainer which has two bolts will be removed, then the terminals which are also fixed with bolts and finally the battery can be extracted.
Posted on 17 January 2020 by ScegliAuto
This video is currently unavailable
Related tutorials
Audi A4
(2004-2008 /
B7)
Today's instructions will show us how to disassemble and replace the battery of the Audi A4, following these simple steps. First, we open the hood of…
Audi A4
(2014-2024 /
B9)
Today we will discover the necessary information in order to dismantle and replace the battery of the Audi A4, following the instructions below. Firs…
Audi A4
(2000-2004 /
B6)
Following these brief and simple steps, we will see how to disassemble and replace the battery of the Audi A4. First, open the hood of the car and st…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.150
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
