Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace an air filter on Audi A6

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Air filter

Let's see how to replace the engine air filter mounted on an Audi A6. We open the car door, pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same with the rod. Remove the engine air hose, then open the air kit (unscrew the tightening screws if present), uncover the filter box cap and extract the worn air filter. We insert a new filter in the dedicated housing (making it adhere well around the walls). Finally we reassemble the cap of the air box and tighten the screws. We close the front hood at the end of replacing.

Posted on 3 April 2020 by ScegliAuto

Video tutorial

Related tutorials

How to replace a pollen filter on Audi A6
How to replace a pollen filter on Audi A6
Audi A6 (1997-2004 / C5, MK 2) How to replace the pollen filter on an Audi A6? Let's see in this video how to disassemble the filter placed in the dedicated housing. Unscrew the sc…
How to replace the engine air filter of the Audi A6 2013
How to replace the engine air filter of the Audi A6 2013
Audi A6 (2011-2018 / C7, MK 4) If you own an Audi A6 (2013) and need to replace the engine air filter by yourself, all you have to do is read the following guide and follow all the…
How to replace the air filter of the Audi A6 2.7 TDI
How to replace the air filter of the Audi A6 2.7 TDI
Audi A6 (2004-2012 / C6, MK 3) Following these brief instructions, we will see how to disassemble and replace the engine air filter of the Audi A6 with a 2.7 TDI engine, in simple …

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos