Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement windshield wipers Audi A4 Avant

Model: Audi A4 B7 - Years 2004-2008
Part: Windshield wipers

In this video we will see how to replace the front wiper blades of the Audi A4 Avant B8. First we go to raise our old brushes: now (depending on the type) we go to unhook the old brush by pressing the plastic part and at the same time going to remove it. Now reassemble the new brush with the same procedure by opening it, putting it in position and then closing it again. It is recommended to use only original wiper blades (or in any case of good quality) so as not to compromise the safety of the driver and to have a longer duration of the wiper itself!

Posted on 30 June 2020 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front windshield wipers of the Audi A4
Replacement of the front windshield wipers of the Audi A4
Audi A4 (2000-2004 / B6) Today we will see the instructions that will allow us to disassemble and replace the front wipers of the Audi A4, in simple and quick steps. First of…
Where is the windshield wiper relay located in the Audi A4?
Where is the windshield wiper relay located in the Audi A4?
Audi A4 (1994-2000 / B5) If the windshield wipers of our Audi A4 have suddenly stopped working, we can first check the condition of the respective relay, whose position is in…
Disassembly of the rear windshield wiper motor of the Audi A4.
Disassembly of the rear windshield wiper motor of the Audi A4.
Audi A4 (2007-2016 / B8) The steps illustrated in this guide will show us how to disassemble and replace the rear windshield wiper motor or rear wiper of the Audi A4. First, …

Other guides you may be interested in

How to Replace the Radio in a Ford Focus

First, engage the handbrake and put the car in a low gear to prevent it from rolling during the replacement. Next, lift the bonnet to disconnect the battery cables and protect the electronic components. Unscrew the two screws located under the front panel of the stereo. Use a plastic lever to lift the bottom of the stereo. Disconnect the connector at the bottom and also remove the stereo lock at the back. Now, install the new stereo following the guides from the old one.

Watch the video!


by ScegliAuto

More videos