Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Rear Bumper of an Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Rear bumper

See other generations:
Video tutorial

In this video tutorial, you will see how to remove and replace the rear bumper of an Audi A4 B8. First, gather a screwdriver and unscrew the screws found in the fenders on both sides. Next, remove the Torx screws located under the bumper and also remove the taillights; to do this, unscrew the screws of the light found inside and disconnect the electrical connector of the bulbs.

At this point, you can start to unclip the bumper by removing the clips located near the lights, as shown in the video.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

Audi A4 (2000-2004 / B6) Follow this guide for instructions on how to remove and replace the rear bumper of the Audi A4 in simple and quick steps. First, move to the rear of …
Audi A4 (2004-2008 / B7) How to remove the rear bumper of an Audi A4? Follow these steps to proceed, a task that is not too complex if done in order: First, use a screwdriver…
Audi A4 (2004-2008 / B7) How to remove the rear bumper on Audi A4? Follow these steps for a straightforward operation: open the trunk, grab a Phillips screwdriver and a socke…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos