Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the door lock module Audi A4 B8

Model: Audi A4 B8 - Years 2007-2016
Part: Door lock

Let's see in this video the steps to be able to remove the rear door lock module of an Audi A4 B8. First of all, we open the door and remove the door panel, unhooking the plastic moldings and unscrewing the screws underneath; once all the screws of the panel have been removed and the panel itself has been removed, we are going to disconnect the handle cable and the electric connector of the window lifter button. At this point we remove the rear plastic cover and disconnect the lock connector; then unscrew the lateral fixing screw and remove the lock, as shown in the video!

Posted on 26 November 2020 by ScegliAuto

Video tutorial

Related tutorials

Remove the door lock mechanism on the Audi A4 B6-B7
Remove the door lock mechanism on the Audi A4 B6-B7
Audi A4 (2004-2008 / B7) In this video tutorial we will see the steps that will allow us to disassemble and replace the front door lock mechanism on the Audi A4 B6 and B7. Fi…
How do you replace the door lock on the Audi A4?
How do you replace the door lock on the Audi A4?
Audi A4 (2000-2004 / B6) The replacement of the Audi A4 door lock is carried out by completely disassembling the door panel, after the fixing screws have been unscrewed: once…
How do you replace the door lock of the Audi A4?
How do you replace the door lock of the Audi A4?
Audi A4 (2007-2016 / B8) In order to replace the door lock of the Audi A4, you need to pry with an object so that the trims on the top and middle part of the door panel can b…

Other guides you may be interested in

How to Remove the Cabin Fan Resistor on a Mercedes A-Class W169

If the cabin fan speed does not change when adjusted or only activates at maximum speed, the fan resistor may be damaged. Replacing it is fairly easy, and the part is readily available. The resistor is located right behind the center console, but you can access it by removing the trim panel directly below the steering column and then detaching the side cover of the tunnel. At this point, you can easily reach the resistor and its power connector; just pull it out of its housing to replace it.

Watch the video!


by ScegliAuto

More videos