Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Pump Replacement on Audi A6

Model: Audi A6 MK 2, C5 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Fuel pump

See other generations:
Video tutorial

Turn off the car and disconnect the battery by removing the terminals. On this model, the fuel pump is located under the rear seats.

Remove the seats by detaching them from their lower mounts and take them out of the cabin. Remove the top cover of the pump by unscrewing the three small screws.

Disconnect the large connector using a flathead screwdriver, then remove the metal clamps. Disconnect the fuel lines and mark how far they were inserted.

Remove the retaining ring by turning it counterclockwise. At this point, you can lift the lower cover and create the necessary space to unscrew the pump and install the new one.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Fuel Pump Replacement on Audi A6
Fuel Pump Replacement on Audi A6
Audi A6 (2004-2012 / C6, MK 3) How do you remove the fuel pump on an Audi A6? First, remove the access covers for the pump: either the rear seat cushions or the cover panel. Once a…
How to Remove the Fuel Pump on Audi A6
How to Remove the Fuel Pump on Audi A6
Audi A6 (1997-2004 / MK 2, C5) Learn how to remove the damaged fuel pump on an Audi A6. Remove the rear seat cushions, then use a socket wrench to unscrew the metal cap's securing …
How to Replace the Fuel Pump on an Audi A6
How to Replace the Fuel Pump on an Audi A6
Audi A6 (1997-2004 / MK 2, C5) How do you replace the fuel pump on an Audi A6? First, disconnect the battery cables. Then, remove the rear seat cushions from the car. Use a wrench …

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos