Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Side Turn Signal on the Audi Q3

Model: Audi Q3 8U - Years 2011-2018
Part: Side marker bulb

In this video, you will learn how to replace the side turn signal in the exterior rearview mirror of the Audi Q3. Start by carefully detaching the mirror using a plastic lever. Use tweezers to disconnect the defrosting system wires from the mirror. Next, remove the mounting screws of the cover with a Phillips screwdriver. Detach the cover and pull it upwards. Disconnect the wire from the turn signal using a flathead screwdriver, then unscrew the screw that secures the turn signal to the cover and install the new turn signal. Finally, reattach the cover, remembering to reconnect the wire, plug the wires back into the mirror, and snap the mirror back in place by pressing evenly.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi Q3 (2011-2018 / 8U) To replace the battery in the Audi Q3 remote, press the button located at the top of the device to release the emergency key. Once the key is out of …
Audi Q3 (2011-2018 / 8U) To replace the battery in an Audi Q3, open the hood to access the components located inside the engine compartment. On the right side, you will find …
Audi Q3 (2011-2018 / 8U) To replace the battery in an Audi Q3, open the hood and access the engine compartment by removing the front and top covers of the battery. The batter…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos