Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A5
    4. : Replacing the lock on the Audi A5

Audi A5 - Video tutorial

Model: Audi A5 8F, 8T3, 8T8, 8T - Years 2007-2016
Part: Lock
Operation: Replacing the lock on the Audi A5

Open the affected door, where you will then replace the lock, and remove the external plastic next to the handle with the help of a plastic wedge. Now work on the inside of the door by removing, again with the wedge or lever, the long strip of plastic at the height of the inside handle. Then remove the cover of the central handle and unscrew the torx at this point uncovered. Also unscrew all the other bolts shown in the video, such as the ones holding the panel from below. Now you can remove the door panel and follow the procedure in the video until you get to the lock.


Posted on 16 February 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos