Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do i replace the reverse light bulb on the Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: Light bulb

To be able to remove the reverse light bulb from the Audi A4, lift the tailgate of the luggage compartment and remove the plastic cover which is located on the inside, on the left side. Once the cover has been removed, a connector will have to be disconnected and the plastic housing on which the two bulbs are placed will have to be removed. The reverse light bulb will have to be inserted in the smaller housing at the bottom. Once the reverse light bulb is inserted, you can plug in the connector and reinsert the plastic part under the cover of the inside of the tailgate.

Posted on 17 August 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the reverse light bulb on an Audi A4
How to replace the reverse light bulb on an Audi A4
Audi A4 (2007-2016 / B8) Before starting, we will have to open the tailgate of our Audi A4. So let's start by disengaging and moving the internal cover placed near the revers…
Where is the reverse light switch in the Audi A4 and how to replace it?
Where is the reverse light switch in the Audi A4 and how to replace it?
Audi A4 (2000-2004 / B6) As we can see in the attached video tutorial, in the Audi A4 B6 the reverse light switch is positioned right in the gearbox, near the drive shaft boo…
How do i replace the reverse light sensor on the Audi A4?
How do i replace the reverse light sensor on the Audi A4?
Audi A4 (2000-2004 / B6) In order to replace the Audi A4 reverse light sensor, the bolts that secure the plate shown in the video, located under the vehicle at the front, mus…

How to Install the Sat Nav in the Alfa Romeo 147

Finding a sat nav for the Alfa Romeo 147 is extremely simple and economical, as this model of sat nav is installed in many models from the brand; first, ensure you obtain the unlock code for the sat nav and the corresponding support frame. Once you have removed the original stereo and the compartment beneath, cut and remove the plastic strip in the centre to insert the frame, which will be secured with four screws along the outer edge and three inside. Then, insert the sat nav by connecting the relevant plugs before securing it in place.

Watch the video!


by ScegliAuto

More videos