Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of an Audi A2

Model: Audi A2 MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Engine oil

Video tutorial

Before starting, open the front bonnet of your Audi A2. Begin by unscrewing and removing the top oil filler cap, then lift the front end of your vehicle. Next, position a container underneath the oil sump.

Once done, unscrew and remove the lower drain plug. This will allow all the engine oil to drain out. Once the engine oil has completely drained, re-screw the drain plug, then lower the front end. At this point, pour in the new oil through the filler hole, and then re-screw the corresponding cap. When you have re-screwed the cap, you will have completed the engine oil change on your Audi A2.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on an Audi A2 1.9 TDI
Audi A2 (1999-2005 / MK 1) Today, this guide will show you how to remove and replace the timing belt on an Audi A2. First, lift the vehicle and remove the lower engine cover by…
Where is the battery located on the Audi A2?
Where is the battery located on the Audi A2?
Audi A2 (1999-2005 / MK 1) In this video, you can see where the battery is located on the Audi A2, in case you need to replace it or use a starter. It is not found in the usual…
Audi A2 Thermostat Replacement
Audi A2 Thermostat Replacement
Audi A2 (1999-2005 / MK 1) Remove the damaged thermostat from an Audi A2. Access it from the engine bay or, if more convenient, from underneath. Remove the bolts from the therm…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos