Do it yourself
Frequently asked questions about cars and motorcycles

Engine Coolant Thermostat Replacement

Model: Audi A4 B6 - Years 2000-2004
Part: Thermostat

A stuck coolant thermostat can cause serious engine damage, so immediate action is necessary. Open the hood and remove the engine cover. Remove the two hose clamps on the air duct to access the adjustment block. Below is the thermostat that needs to be removed using a wrench. Disconnect the various water hoses to access the thermostat and proceed with its removal. The thermostat is located on an aluminum elbow that needs to be removed. Install the new thermostat and reassemble the various components that were previously removed. Reconnect the air duct and refill the coolant.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi A4 (2004-2008 / B7) This guide shows how to replace the engine coolant thermostat on an Audi A4 B7. The first step is to disconnect the battery. Remove the serpentine be…
Audi A4 (2007-2016 / B8) Before you begin, open the hood of your Audi A4. Start by removing the upper engine cover by simply disengaging it. Next, drain the cooling system to…
Audi A4 (2004-2008 / B7) In this video tutorial, you will see the main steps to remove the thermostat on the 2.0 TDI engines of Audi and Volkswagen. Before starting, drain th…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos