Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Window on Audi Q7 MK1

Model: Audi Q7 MK 1, 4L - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Side window

See other generations:
Video tutorial

In this video tutorial, we will see the main instructions for removing and replacing the rear side window or glass of the first generation Audi Q7. First, open the rear door and start by removing the door panel; to do this, remove the center cover and unscrew the fastening screws located underneath, disconnecting the electrical connector and the handle cable.

Next, remove the speaker and the side pillars of the window; then unscrew the guide screws and extract the glass, following the video tutorial to the end!


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Replacing Rear Headlight Bulb on Audi Q7
Replacing Rear Headlight Bulb on Audi Q7
Audi Q7 (2006-2015 / MK 1, 4L) In this video tutorial, you will learn how to remove and replace the rear headlight bulb on an Audi Q7, following the simple steps outlined below. Fi…
How do you replace the rear tailgate lock of the Audi Q7?
How do you replace the rear tailgate lock of the Audi Q7?
Audi Q7 (2006-2015 / MK 1, 4L) In order to replace the rear hatch lock of the Audi Q7, you will need to open the rear hatch so that you can locate the plastic inner lining: this ca…
How to replace the rear headlight bulb of the Audi Q7
How to replace the rear headlight bulb of the Audi Q7
Audi Q7 (2006-2015 / MK 1, 4L) To replace the rear headlight bulb of the Audi Q7, we can perform two types of procedures. To perform the first procedure, we need to remove the cap …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos