|
Do it yourself
| |||
| ||||
How to replace the remote control battery of an Audi A4.
This guide will show you how to replace the key battery of an Audi A4. On the sides of the Audi logo, on the side of the key near the key ring, there are two keys; It is necessary to press them at the same time to be able to remove the piece in question which will come out of the remote control together with the key. At this point we have to press the same keys again; by doing this it will also be possible to extract the battery compartment. We will therefore have to replace the CR2032 battery with the new one, inserting it with the negative pole in view and the positive one towards the plastic support. Once this is done we will have to reinsert the battery compartment; at 1: 25 minute it is possible to see inside the remote control the metal contact towards which the battery must make contact. Once the battery compartment has been inserted, we press the side buttons again to make it enter correctly. Finally we reinsert the key in its compartment, sliding it until the locking mechanism clicks.
Posted on 11 December 2021 by ScegliAuto
Video tutorial
Related tutorials
Audi A4
(2014-2024 /
B9)
In order to replace the battery of the remote control on the Audi A4, you need to press the button on the top of the device so that you can remove th…
Audi A4
(2004-2008 /
B7)
The replacement of the Audi A4 remote control battery is done by levering with an object so that the cover on the back of the device can be removed: …
Audi A4
(2007-2016 /
B8)
In this video we can see how to replace the remote control battery of the Audi A4 B8. For this simple operation we do not need any tools, but only a …
Other guides you may be interested in
|
Replacing H7 Bulb in an Opel Meriva
Are the front headlight bulbs of your Opel Meriva out? Let's see how to proceed with the removal in this tutorial video. Open the bonnet and secure it, then remove the inspection caps from the headlights (at the back of the headlights) using a screwdriver or pliers. Disconnect the bulb holders from the headlight and disconnect the relevant power connectors. Replace the damaged bulbs with new ones (same size and voltage). After replacing the bulbs, refit the bulb holder into the headlight housing. Finally, close the back of the headlights with the inspection caps. Test the correct functioning of the lights by turning on the ignition. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.147
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
