Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Backup Camera on the Audi Q3

Model: Audi Q3 8U - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

In this video tutorial, you will see the main instructions for installing a backup camera for parking maneuvers on the Audi Q3. First, obtain the appropriate kit for your vehicle and start mounting the camera on the trunk lid; remove the inner panel to route the wiring for the backup camera, which will connect to the central display on the dashboard.

At this point, disassemble the radio and install the new display (or configure the camera with the existing onboard computer); finally, verify its operation by following the video to the end!


Updated on 13 May 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Audi Q3?
Where are the fuses located in the Audi Q3?
Audi Q3 (2011-2018 / 8U) The fuse boxes installed in the Audi Q3 contain the fuses: in this type of vehicle, there are two boxes for fuse containment. The first is located in…
Where are the fuses located in the Audi Q3?
Where are the fuses located in the Audi Q3?
Audi Q3 (2011-2018 / 8U) The fuses in the Audi Q3 are located inside the designated fuse boxes present in the vehicle: this type of vehicle has two fuse boxes. The first is l…
Where are the fuses located in the Audi Q3?
Audi Q3 (2011-2018 / 8U) The fuse boxes of the Audi Q3 are located inside one of the specific fuse boxes that are present on the car: on this model of vehicle it will be poss…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos