Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the High-Pressure Fuel Pump from the Audi A4 2.0T

Model: Audi A4 B8 - Years 2007-2016
Part: Fuel pump

Discover in this brief guide how to remove and replace the high-pressure fuel pump from the Audi A4 2.0T. First, open the hood and disconnect the fuel supply line located behind the engine block; then disconnect the hose from the filter, as shown in the video. At this point, disconnect all the lines from the high-pressure pump, also disconnecting the electrical connector; then remove the pump and replace it with the new one, using the original part, following the video tutorial to the end!

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel pump of the Audi A4
Audi A4 (2000-2004 / B6) Today we will discover the instructions that will allow us to disassemble and replace the fuel pump of the Audi A4, in simple steps. First of all, we…
How to Replace the Fuel Pump on an Audi A4
How to Replace the Fuel Pump on an Audi A4
Audi A4 (2004-2008 / B7) This guide will show you the instructions on how to disassemble and replace the low-pressure fuel pump on an Audi A4 in simple steps. First, open the…
How to Remove the Fuel Pump from the Audi A4 Fuel Tank
How to Remove the Fuel Pump from the Audi A4 Fuel Tank
Audi A4 (2000-2004 / B6) Is the fuel pump on your Audi A4 damaged? Here’s how to remove it. Start by removing the rear seats to access the fuel pump. Use a socket wrench to u…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos