Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A5
    4. : How to replace the battery of the Audi A5?

Audi A5 - Video tutorial

Model: Audi A5 8F, 8T3, 8T8, 8T - Years 2007-2016
Part: Battery
Operation: How to replace the battery of the Audi A5?

Replacing the battery of the Audi A5 is a very simple operation, let's see how to proceed in this tutorial. First we open the tailgate and remove the bottom of the luggage compartment, the battery is in fact positioned under the spare wheel. We then unscrew the fixing nut of the latter, disconnect the poles using a 10mm wrench and unscrew the bolts of the battery bracket. Once this is done, we insert the spare part and reassemble everything following the reverse procedure. It is recommended to use a buffer battery during the entire operation, so as not to reset the on-board computer.


Posted on 30 June 2022 by ScegliAuto

    Frequently Asked Questions

    • A5 2007-2016 - Where is the battery in the Audi A5 Coupà ©? Read Answer
    • A5 2007-2016 - Where is the battery of an Audi A5 located? Read Answer
    • A5 2007-2016 - Where is the battery located in an Audi A5? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos