Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembling the Car Turbo

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: Turbocharger

Disassembling the turbo is not a complicated job, although patience is required. It can be done calmly, with appropriate breaks, and can be performed in your own garage if you have one. Raise the car on jack stands, disconnect the intercooler if you have one in the original position, unscrew the clamp on the intake tube, disconnect all the water and oil lines from the turbo, and remove the three nuts holding the turbo to the up-pipe and the three bolts on the flange so you can pull the turbo away. When reassembling, be careful with the oil line because if you move it too much, you risk breaking it.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Turbo Lubrication Hose
Replacing Turbo Lubrication Hose
Audi A6 (1997-2004 / MK 2, C5) Turbo lubrication is absolutely essential due to the high RPM; additionally, the oil also acts as a coolant to prevent excessive overheating that cou…
How to Remove a Turbocharger from an Audi A6 3000
How to Remove a Turbocharger from an Audi A6 3000
Audi A6 (2004-2012 / MK 3, C6) Do you want to remove the turbocharger from an Audi A6? Follow this guide to proceed. Open the hood and secure it, then loosen the clamp on the intak…
How to disassemble the turbine on Audi A6 2.7 TDI C5
How to disassemble the turbine on Audi A6 2.7 TDI C5
Audi A6 (2004-2012 / MK 3, C6) Let's see in this video how to remove the turbine on an Audi A6 2.7 TDI version C5. First we open the engine hood of our car and we go to remove the …

How to Change the Side Mirror on a Ford Mondeo

To perform this operation, it is advisable to disconnect the battery cables to protect any delicate circuits, such as the one controlling the mirror adjustment motor. Now, proceed to remove the triangular panel covering the bolts securing the mirror. To do this, unscrew the bolt located in the designated hole, then disconnect the connector supplying the motor. After that, unscrew the bolts to detach the mirror and remove it from the exterior. Reverse the steps described for reassembly.

Watch the video!


by ScegliAuto

More videos